What is the significance of the HDPE Geomembrane?

HDPE Geomembrane is a waterproof barrier material made of (medium) high density polyethylene resin. (Geomembrane with a density of 0,94 g/cm3 or more).

What are the physical properties of HDPE Geomembranes?

How do we properly connect the HDPE Geomembrane and the sealing track?

Under what circumstances should HDPE Geomembrane not be welded?

What are the physical properties of HDPE Geomembranes?

1. HDPE Geomembrane is a flexible waterproof material with a high opacity coefficient (1 x10-17 cm/s);

2. HDPE Geomembrane has good heat resistance and cold resistance and its ambient temperature for use is 110 to C, low temperatures -70 to C;

3. HDPE Geomembrane has good chemical stability and can withstand corrosion of strong acids, alkali and oil. It is a good corrosion protection material;

4. HDPE Geomembrane has a high tensile strength so that it has a high tensile strength to meet the requirements of demanding engineering projects;

5. HDPE Geomembrane has a strong weather resistance, a strong anti-aging performance and can maintain the original performance if exposed for a long time;

6. The total power of HDPE Geomembrane, HDPE Geomembrane has a strong tensile strength and fracture expansion, so that HDPE Geomembrane can be used under different harsh geological and climatic conditions. Adaptation to uneven geological settlements, heavy loads!

7. HDPE Geomembrane uses high-quality new plastic and soot particles without preservatives. HDPE was used in my country to replace PVC as a raw material for food packaging bottles and fresh foil.

How do I properly connect the HDPE Geomembrane and the sealing track?

First cut HDPE Geomembrane into trumpet-shaped pipe buffers corresponding to the diameter of the leakage-water-permeation tube and divide it into 6-8 parts, and then insert the pipe buffers in order from big to small into the penetrating steam pipe, and then adjust them accordingly. The position of the pipe buffer shall be provisionally fixed with a hot air welding burner and the pipe buffer shall not contain any suspended parts. Finally, the large and small muffs of the pipe buffer are welded with the HDPE Geomembrane and the steam pipe penetrating the sickerwater and reinforced with stainless steel tyres.

Under what circumstances should HDPE Geomembrane not be welded?

1. If the connections of the HDPE Geomembrane are affected by condensation, moisture, mud and sand, they should be welded after treatment.

2. HDPE Geomembranes cannot be welded to joints in the event of rain, moisture, dew or strong sand unless protective measures are taken.

3.If the temperature is below 5℃, the design should not be carried out in accordance with the requirements of the specification. If necessary, the welding device should be preheated before welding.

4. During the welding process of the extrusion welding machine, the slider of the gun head should be checked frequently and the slider replaced in a timely manner in case of severe wear to avoid damage to the film surface.

5. HDPE Geomembranes should be fed by a generator with good voltage stabilisation performance when welding and a voltage stabiliser must be used when local electricity is used under special circumstances.

Feicheng Lianyi Plastic Co., Ltd. strives to offer high quality HDPE membranes at reasonable prices, efficient production times and the most professional customer service.